Recommended Posts

I have had 0 RRoD's

I have had my console since launch.

Original Design

Premium.

The only issue I ever had was a user issue when My roomate tripped on the cord and the A/V Cable came out.

This would also be an interesting question to add. How do you have it hooked up? Mine is hooked up via VGA.

1 RROD and 1 DVD Drive went bad

First 2 and my current were/are premium systems. Meant to get the 65nm for the last replacement but picked up the wrong one (went by build date instead of power consumption as I didn't know about the latter till after the fact).

Both lasted about a year

Edited by AndyD
Buy a new one (with the "Go Pro" or "Go Big" box, which should be a Falcon model) and you'll have absolutely nothing to worry about.
I'm getting the elite but isn't the problem for the most part caused by overheating? I wont play anywhere near enough to have that problem. Doesn't the elite have the falcon chip too?
I'm getting the elite but isn't the problem for the most part caused by overheating? I wont play anywhere near enough to have that problem. Doesn't the elite have the falcon chip too?

Since the elite is just a different shell with a different hard drive attached to it, it's subject to the same conditions as the premium/pro models. Essentially, there's 2 types, one with HDMI and one with HDMI but on a falcon chipset.

The best way of telling them apart is to look at the power consumption on the box, if I recall correctly the non-falcons use like 220w or something, but the falcon-based models use 165w of power. I can't remember the exact numbers, but it's a big enough difference that it shouldn't be hard to spot.

Also, the problem isn't overheating as such, it's caused by constant heating and cooling, causing part of the 360 (the X-clamp) to bend and warp. In fact, a short-term remedy for the RROD is to actually heat the console up even more by wrapping a towel around it, part of the problem then becomes part of the (Temporary) solution.

I bought my 360 at the end of September 2007 (this year and no, it wasn't because of Halo =P), it's a pro HDMI but not Falcon-chipset and so far it's been absolutely fine.

I'm on my 4th 360

I got my premium at launch, it RROD after exactly 1 year, sent it in for repair and the console they sent back lasted 3 weeks before it RROD'd on me. The next console I got after that was "new" because I had a warrenty with the store I purchased it from (futureshop) the console scratched a bunch of brand new games without me moving it at all. now I am on my 4th.

the reason I said "new" is because when I received the last 2 consoles not too long ago they said they were manufactured in August 2006. It seems like futureshop purchased far too many consoles and were overstocked up the wazoo, I wish I had a falcon, I didnt even get a Zephyr or the extra heat sync.

I'm glad you guys made a post like this, it will be interesting to see how many of us have red ringed vs not.

0 RRODs, though I've only had mine since mid November. I believe (as mine has the HDMI port) that it's a Falcon 65, but not positive. I do know that this thing gets HOT, even with proper ventilation, but it's stayed solid through a few 8 hour gaming sessions, with no lockups, hiccups or issues that I've seen.

1 RROD in February 2007 from a console w/ Manufacture date of April '06 and was purchased in May '06. So the unit died in 10 months.

Refurbished under warranty with a unit w/ Manufacture date of October '05.

Have not had any problems with refurb unit for 10 months... but I am starting to get nervous now that it has been 10 months.

Out of everyone I know, only one person has not had the RROD at least once. I'm never buying another Microsoft console. Games are great, software on console is great, Live! is great, but this failure rate is unacceptable. Sorry Microsoft, you've lost a customer.

two 360 consoles.

one as strictly a media center edition/linux box in basement (fairly cool)

the other as a gaming rig

Both have talismoon glow replacement fans from the get-go (quieter and push more CFM)

RRoD:

6 gaming rigs

1 MCE/linux

Neither my PS3 or Wii even shown faint signs of failing, where I am on my 7th 360 console.

Gaming is definatly the cause of the failures.

I've been a 360 owner for 2yrs now. And in that time, I've rarely used my consoles (I'll get to why that is plural in a moment).

First console lasted 11mths 3 weeks before it died (RRoR - although, it also sounded like a jet-engine whilst in use) - it was replaced under warranty. This was before the 3yr extended warranty (only for the RRoD) happened.

My 2nd console does not suffer from the RRoD issue. However, it is convinced that every single disc I place into it is dirty, or damaged. Even the ones straight out of the shrink-wrap.

I can probably play for about 10mins before I get the 'disc cannot be read' error. Which is just short enough that I can't progress through a game, earn any bonuses, or reach a save point.

I hate my 360. I can't understand how a company can get away with selling such clearly faulty hardware. I'd like to be playing games on it right now, but, what's the point? I might as well just leave it, and watch a DVD.

So, my current/replacement 360 is out-of-warranty. Microsoft kindly tell me that since I don't have the RRoD issue, that it is going to cost me ?50.99 (101.62USD) to 'repair' it - which will take 10-20 days.

Part of me wants to...

Save the ?50.99, and

a) batter f*ck out of this console with a hammer. And finally get more than 10mins fun out of it.

or

b) hack it - probably involving 'chipping' it, and replacing the DVD drive myself (this 'dirty' issue seems to be common in about 5% of consoles). And while I'm at it, I'd re-do all the thermal paste, and see about beefing up the internal fans.

But, I'll probably give in, and pay the damn fee. Ho hum.

2 consoles died under extended service contract (Premium non HDMI edition)

Launch unit RROD - replaced with refurb

Refurb unit froze constantly, replaced with 2nd refurb (this one is super loud)

If it dies again I'm going to buy a brand new elite and get this one repaired and ebay it.

Those of you with (or without) problems please detail.

How many have you had? 1

How long have you owned your console? Since Launch

Do you have the original design or the new Falcon 65nm core? Original

Is it a Core, Arcade, Pro, Elite, Halo, etc? PRO

My 2nd console does not suffer from the RRoD issue. However, it is convinced that every single disc I place into it is dirty, or damaged. Even the ones straight out of the shrink-wrap.

I know I already posted but I also want to note that I am getting dirty disc errors or the "this is an xbox 360 disc please place it in an Xbox 360" message on brand new discs sometimes. I found that the disc's underside (the dye) looked very leaky and not normal when I had a disc that was "dirty". i simply returned the disc and got a new one when this happens and the new discs always seem to work. I believe this is a problem with cheap lasers in the drives and quality control at the disc pressing plants.

Buy a new one (with the "Go Pro" or "Go Big" box, which should be a Falcon model) and you'll have absolutely nothing to worry about.

Do the Falcon's really fix all of the 360's RROD/Freezing problems? I know there's still going to be hardware failures, but is it enough to to drastically drop down the failure rates to a 1 digit number?

How many have you had?

1

How long have you owned your console?

7 or 8 months

Do you have the original design or the new Falcon 65nm core?

original design

Is it a Core, Arcade, Pro, Elite, Halo, etc?

core

NO ROD so far, but it gives some strange noises during cooldown after i turned it off... :p

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I don't understand the vision. Do people really want to buy a new computer from Dell with 6 browsers installed? We all keep asking for Microsoft to stop having so much junk on their OS, and adding a bunch of browsers seems to go against that. Ideally, we would just be asked what browser we want during OOBE but Google is just going to pay Dell a bunch of money to include Chrome. Additionally, would you want your phones to start including all the browsers too when you get them? The only thing I ever wanted was to be able to uninstall IE or edge and I believe you are now able to. I do agree that microsoft needs to chill with their "are you sure you don't want to try edge before you install chrome" ads when going to download chrome.
    • The funny thing here is that like 70% or so of the web browser users use 'Google Chrome' as web browser. What I don't understand is that why on earth would ANYONE choose 'Google Chrome' on Windows when 'Microsoft Edge' is not just better in most things, but it's already there right out of the box for the Windows users. Microsoft Edge has less data collection (yes, that's a fact), less RAM usage and is more optimized for Windows (as it's a Microsoft product) right out of the box. I'm sure you will come with the argument of bloat in Microsoft Edge. Sure, but most of that can be fixed with a simple tool (there are many good ones out there for this). Yes, that require a couple of clicks in the same way as it requires several clicks to install 'Google Chrome'. And I'm sure you really love the 4 GB of AI-slop data 'Google Chrome' is downloading for Chrome without you agreeing to it. Fun right? Sure, the way Microsoft is pushing 'Microsoft Edge' on users might not be the best way of doing it and might need to change. But I would never choose 'Google Chrome' over 'Microsoft Edge' today anyways. I'm sure there was a period back in the days when 'Google Chrome' actually was better in most things, but that period is not today.
    • JetBrains rolls out IntelliJ IDEA update with Markdown preview fixes and more by David Uzondu Image via JetBrains IntelliJ 2026.1.3 from JetBrains has landed, bringing several highly requested bug fixes that target common UI glitches and terminal rendering issues. If you run tmux inside the integrated terminal, the IDE no longer renders the cursor above the active line. The Markdown preview bug, which was fixed in this release, had annoyed developers for quite some time, as the preview pane failed to render images saved outside the project directory. Instead of displaying the actual image, the IDE simply showed a broken image icon, a problem that stuck around for two years before this update. Over on Windows, developers running WSL can now use wsl.exe to spin up their environments without losing terminal functionality. In previous builds, launching a terminal shell with something like wsl.exe -d ubuntu inside a Windows-based project broke both shell integration and active process detection. Other bug fixes in this release include: An issue where Gradle sync incorrectly reported success as a failure on WSL when using Gradle 9.5.0. A syntax highlighting bug that flagged valid Java for-loop initialization blocks with multiple statements as incorrect. A warning bug that triggered a false non-null local variable alert when using JSpecify annotations. A database generation bug that hid the option to use a DELETE statement instead of a TRUNCATE checkbox. A Kotlin highlighting failure where an assertion error in the Gradle redundant library inspection broke error highlighting. A UI bug where the ComboBox popup lacked a maximum height restriction. A Snowflake syntax error where DataGrip failed to support the "create temp" command. A Svelte syntax parsing failure that incorrectly flagged quotes inside inline expressions. A VCS repository manager deadlock that triggered thread pool exhaustion. A memory leak where the LazyTree component kept all previous versions of a tree in memory. IntelliJ 2026.1.3 is the third bug fix release for the IntelliJ 2026.1 series. The first one landed back in April with a fix for the WSL Python interpreter freeze, another fix for guest participants using Emmet abbreviations, and corrected WildFly server deployment errors.
    • That stupid annoying Sign in with Google on all these sites now... get the fk outta here
  • Recent Achievements

    • Collaborator
      Asgardi earned a badge
      Collaborator
    • Conversation Starter
      mobandz earned a badge
      Conversation Starter
    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      469
    2. 2
      PsYcHoKiLLa
      243
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      73
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!