The Official NDS Homebrew Thread


Recommended Posts

It's slot one so no GBA support unless you also have a GBA flash cart (R4/M3 Simply will function as passme devices). Also, homebrew compatibility with most of the more popular apps is lacking, but that's not their fault and it's improving as developers take slot 1 solutions more seriously.

Thanks for the reply, bfoos. So, in your opinion, do you think that right now it's better to go with a Supercard + Superkey combo? Or will the R4 be improved at a steady pace?

Hey guys I settled on the M3 Simply Perfect. Seems to be the best of the bunch (I do realize the R4 is identical, but so were the prices from where I purchased it :p).

I'm curious.. Since the actual "Launcher" program is something you have to copy from the CD (or internet) to your MicroSD card, then isn't it possible to get a different launcher? Or are they restricted to the type of homebrew cartridge you have?

The lack of GBA support is a bit crappy, however I wouldn't be surprised if they come out with some kind of workaround for slot 1 solutions.

Hey guys I settled on the M3 Simply Perfect. Seems to be the best of the bunch (I do realize the R4 is identical, but so were the prices from where I purchased it :p).

I'm curious.. Since the actual "Launcher" program is something you have to copy from the CD (or internet) to your MicroSD card, then isn't it possible to get a different launcher? Or are they restricted to the type of homebrew cartridge you have?

The lack of GBA support is a bit crappy, however I wouldn't be surprised if they come out with some kind of workaround for slot 1 solutions.

They won't come out with a workaround for slot-1 GBA compatibility. Slot-1 isn't fast enough to run GBA games. Period.

The launcher you need will be updated on M3's website. It's not something that other people can write for. So yes, it's restricted to the type of cart you have.

They won't come out with a workaround for slot-1 GBA compatibility. Slot-1 isn't fast enough to run GBA games. Period.

The launcher you need will be updated on M3's website. It's not something that other people can write for. So yes, it's restricted to the type of cart you have.

Well luckily the chip I'm getting supports the ability to boot off Slot-2. So all I'd have to buy is the device for the GBA port (and no passme/etc) to get GBA stuff up and running.

Which of these slot-1's do you guys recommend? I know I'd need a micro-SD card for the R4 but the built in 4GB on the 'Fire' one sounds appealing. I'm just unsure on the homebrew compatibility on them, anyone got any info/advice?

http://www.consoleplus.co.uk/product_info....and-ds-lite-4gb

http://www.consoleplus.co.uk/product_info....ds-lite-adapter

http://www.consoleplus.co.uk/product_info....ds-lite-adapter

I went with the R4 after reading these opinions. Had to get a micro-SD too but the 512MB ones don't cost too much from Amazon, even though delivery was extortionate for such a tiny item. I'll let the thread know how it goes anyway when it arrives.

They won't come out with a workaround for slot-1 GBA compatibility. Slot-1 isn't fast enough to run GBA games. Period.

The launcher you need will be updated on M3's website. It's not something that other people can write for. So yes, it's restricted to the type of cart you have.

Ok, stupid question, but cant you run gba backups off the slot 1 card, with an emulator? :unsure:

Ok, stupid question, but cant you run gba backups off the slot 1 card, with an emulator? :unsure:

That would make it even slower.

Best bet is a mem cart in Slot 2, which the homebrew is then transfered too, then run it from the cart.

That would make it even slower.

Best bet is a mem cart in Slot 2, which the homebrew is then transfered too, then run it from the cart.

Oh well...

Yeah, was kinda disappointed about the lack of gba support...And was hoping that the slot 1 cards would handle gba backups...

btw, any of you guys get any of the slot 1 cards yet. I wanted to get the DS Extreme, but there seems to be no stock anywhere, and the places that do have it are charging an arm and a leg...

Looks like I'm going to have to settle for one of the new slot 1 cards...

I got my R4 DS yesterday. Everything works pretty good. Roms, mp3s, dpgs, dsdoom, etc. I compiled moonshell 1.6 to replace the version it uses. I'm looking for some moonshell skins though. I like some of the ones here...

http://webpages.charter.net/braineatingali...ll%20skins.html

Especially Screens or something by prazole, but all of the links there are dead. Does anybody know where I can find that skin, or any skins for that matter?

I got my R4 DS yesterday. Everything works pretty good. Roms, mp3s, dpgs, dsdoom, etc. I compiled moonshell 1.6 to replace the version it uses. I'm looking for some moonshell skins though. I like some of the ones here...

http://webpages.charter.net/braineatingali...ll%20skins.html

Especially Screens or something by prazole, but all of the links there are dead. Does anybody know where I can find that skin, or any skins for that matter?

Go here for some good skins. I'm really pleased with my R4, and with the DLDI patch all the homebrew I've tried has worked no problem.

So would you guys recommend the R4? :unsure:

I'd wait for a microSD deal, I just bought a 1 GB for $4 after rebate yesterday.

My own question. I bought the R4 and it seems to be working well at this point. I was wondering what the best solution would be for playing GBA games now that I have the R4 which can act as a Passme device. Also, how do you apply the R4 skins?

And now.. time for a question storm:

What is the main diffrence between the R4 and the M3?

Does the M3 have better homebrew support than the R4? I'm looking for one that supports the most amount of ROMs while still having good homebrew support (for movies, music & pix)

also, is there a certain type/brand of microSD that gives better performance with a specific cart?

is there a perfered retailer or order from (US location)?

thanks in advance

-morf

also, is there a certain type/brand of microSD that gives better performance with a specific cart?

is there a perfered retailer or order from (US location)?

Go with the well established brand names, ie Kingston, Sandisk, Toshiba etc.

I also read that Japanese made cards are better. No idea how better, or if this is true or not but it was mentioned in a gbatemp review.

And now.. time for a question storm:

What is the main diffrence between the R4 and the M3?

Does the M3 have better homebrew support than the R4? I'm looking for one that supports the most amount of ROMs while still having good homebrew support (for movies, music & pix)

also, is there a certain type/brand of microSD that gives better performance with a specific cart?

is there a perfered retailer or order from (US location)?

thanks in advance

-morf

There is no difference between the R4DS and the M3 Simply. It's the exact same hardware, short of a few bridged jumpers (pun intended). The newer revisions don't have the jumper to switch between R4 and M3, but it's still the same hardware. R4 is the manufacturer of both devices and they release firmware updates first, followed by M3 a day or two later.

As far as micro sd cards goes, Kingston/Toshiba SD-C01G Japan cards are the best.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, It would appear so, according to https://finance.yahoo.com/news/how-to-hide-your-home-on-google-maps-apple-maps-204146687.html. Regards, Aryeh Goretsky      
    • Hello, The Nvidia Founders Edition 3080 video card is approximately six years old, correct? Have you looked into whether replacement fans are available for it? Perhaps replacing those will improve cooling, especially when combined with cleaning the card's heatsink and replacing the thermal interface materials. Regards, Aryeh Goretsky  
    • Hello, While ~104 GB of space may seem generous (at least compared to other e-readers which have 8-32GB), I feel at this price point the device should have a Micro SDXC card slot for expansion, particularly if it allows audio books to be installed and played. I hope to see more reviews of 6" phone-sized e-readers on Neowin in the future. It will be interesting to see how they compare. Regards, Aryeh Goretsky
    • Sandboxie Plus 1.17.8 / Classic 5.72.8 by Razvan Serea Run programs in a sandbox to prevent malware from making permanent changes to your PC. Sandboxie allows you to run your browser, or any other program, so that all changes that result from the usage are kept in a sandbox environment, which can then be deleted later. Sandboxie is a sandbox-based isolation software for 32- and 64-bit Windows NT-based operating systems. It is being developed by David Xanatos since it became open source, before that it was developed by Sophos (which acquired it from Invincea, which acquired it earlier from the original author Ronen Tzur). It creates a sandbox-like isolated operating environment in which applications can be run or installed without permanently modifying the local or mapped drive. An isolated virtual environment allows controlled testing of untrusted programs and web surfing. Sandboxie is available in two flavors Plus and Classic. Both have the same core components, this means they have the same level of security and compatibility. What's different is the user interface the Plus build has a modern Qt based UI which supports all new features that have been added since the project went open source. The Classic build has the old no longer developed MFC based UI, hence it lacks support for modern features, these features can however still be used when manually configured in the Sandboxie.ini. Sandboxie Plus 1.17.8 / Classic 5.72.8 release notes: Added added DisableCustomTitleOpt=[process,][y|n] to allow [#] sandboxie title markers on custom-titlebar windows (Delphi VCL, Qt, Electron) that were previously skipped to prevent DWM repaint CPU loops #5387 Changed updated bundled ImDisk driver to 3.0.2 #5419 Fixed fix Suppress logs for expected non-user SIDs #5422 SbieSvc.exe: SBIE2218/2219 error when run program as administrator #5417 fixed explorer.exe crashes in Application Compartment when Huorong Security is installed #5423 Download: Sandboxie Plus (64-bit) | 23.5 MB (Open Source) Download: Sandboxie Classic (64-bit) | 3.0 MB Links: Sandboxie Website | GitHub | ARM64 | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!