The Official NDS Homebrew Thread


Recommended Posts

It's slot one so no GBA support unless you also have a GBA flash cart (R4/M3 Simply will function as passme devices). Also, homebrew compatibility with most of the more popular apps is lacking, but that's not their fault and it's improving as developers take slot 1 solutions more seriously.

Thanks for the reply, bfoos. So, in your opinion, do you think that right now it's better to go with a Supercard + Superkey combo? Or will the R4 be improved at a steady pace?

Hey guys I settled on the M3 Simply Perfect. Seems to be the best of the bunch (I do realize the R4 is identical, but so were the prices from where I purchased it :p).

I'm curious.. Since the actual "Launcher" program is something you have to copy from the CD (or internet) to your MicroSD card, then isn't it possible to get a different launcher? Or are they restricted to the type of homebrew cartridge you have?

The lack of GBA support is a bit crappy, however I wouldn't be surprised if they come out with some kind of workaround for slot 1 solutions.

Hey guys I settled on the M3 Simply Perfect. Seems to be the best of the bunch (I do realize the R4 is identical, but so were the prices from where I purchased it :p).

I'm curious.. Since the actual "Launcher" program is something you have to copy from the CD (or internet) to your MicroSD card, then isn't it possible to get a different launcher? Or are they restricted to the type of homebrew cartridge you have?

The lack of GBA support is a bit crappy, however I wouldn't be surprised if they come out with some kind of workaround for slot 1 solutions.

They won't come out with a workaround for slot-1 GBA compatibility. Slot-1 isn't fast enough to run GBA games. Period.

The launcher you need will be updated on M3's website. It's not something that other people can write for. So yes, it's restricted to the type of cart you have.

They won't come out with a workaround for slot-1 GBA compatibility. Slot-1 isn't fast enough to run GBA games. Period.

The launcher you need will be updated on M3's website. It's not something that other people can write for. So yes, it's restricted to the type of cart you have.

Well luckily the chip I'm getting supports the ability to boot off Slot-2. So all I'd have to buy is the device for the GBA port (and no passme/etc) to get GBA stuff up and running.

Which of these slot-1's do you guys recommend? I know I'd need a micro-SD card for the R4 but the built in 4GB on the 'Fire' one sounds appealing. I'm just unsure on the homebrew compatibility on them, anyone got any info/advice?

http://www.consoleplus.co.uk/product_info....and-ds-lite-4gb

http://www.consoleplus.co.uk/product_info....ds-lite-adapter

http://www.consoleplus.co.uk/product_info....ds-lite-adapter

I went with the R4 after reading these opinions. Had to get a micro-SD too but the 512MB ones don't cost too much from Amazon, even though delivery was extortionate for such a tiny item. I'll let the thread know how it goes anyway when it arrives.

They won't come out with a workaround for slot-1 GBA compatibility. Slot-1 isn't fast enough to run GBA games. Period.

The launcher you need will be updated on M3's website. It's not something that other people can write for. So yes, it's restricted to the type of cart you have.

Ok, stupid question, but cant you run gba backups off the slot 1 card, with an emulator? :unsure:

Ok, stupid question, but cant you run gba backups off the slot 1 card, with an emulator? :unsure:

That would make it even slower.

Best bet is a mem cart in Slot 2, which the homebrew is then transfered too, then run it from the cart.

That would make it even slower.

Best bet is a mem cart in Slot 2, which the homebrew is then transfered too, then run it from the cart.

Oh well...

Yeah, was kinda disappointed about the lack of gba support...And was hoping that the slot 1 cards would handle gba backups...

btw, any of you guys get any of the slot 1 cards yet. I wanted to get the DS Extreme, but there seems to be no stock anywhere, and the places that do have it are charging an arm and a leg...

Looks like I'm going to have to settle for one of the new slot 1 cards...

I got my R4 DS yesterday. Everything works pretty good. Roms, mp3s, dpgs, dsdoom, etc. I compiled moonshell 1.6 to replace the version it uses. I'm looking for some moonshell skins though. I like some of the ones here...

http://webpages.charter.net/braineatingali...ll%20skins.html

Especially Screens or something by prazole, but all of the links there are dead. Does anybody know where I can find that skin, or any skins for that matter?

I got my R4 DS yesterday. Everything works pretty good. Roms, mp3s, dpgs, dsdoom, etc. I compiled moonshell 1.6 to replace the version it uses. I'm looking for some moonshell skins though. I like some of the ones here...

http://webpages.charter.net/braineatingali...ll%20skins.html

Especially Screens or something by prazole, but all of the links there are dead. Does anybody know where I can find that skin, or any skins for that matter?

Go here for some good skins. I'm really pleased with my R4, and with the DLDI patch all the homebrew I've tried has worked no problem.

So would you guys recommend the R4? :unsure:

I'd wait for a microSD deal, I just bought a 1 GB for $4 after rebate yesterday.

My own question. I bought the R4 and it seems to be working well at this point. I was wondering what the best solution would be for playing GBA games now that I have the R4 which can act as a Passme device. Also, how do you apply the R4 skins?

And now.. time for a question storm:

What is the main diffrence between the R4 and the M3?

Does the M3 have better homebrew support than the R4? I'm looking for one that supports the most amount of ROMs while still having good homebrew support (for movies, music & pix)

also, is there a certain type/brand of microSD that gives better performance with a specific cart?

is there a perfered retailer or order from (US location)?

thanks in advance

-morf

also, is there a certain type/brand of microSD that gives better performance with a specific cart?

is there a perfered retailer or order from (US location)?

Go with the well established brand names, ie Kingston, Sandisk, Toshiba etc.

I also read that Japanese made cards are better. No idea how better, or if this is true or not but it was mentioned in a gbatemp review.

And now.. time for a question storm:

What is the main diffrence between the R4 and the M3?

Does the M3 have better homebrew support than the R4? I'm looking for one that supports the most amount of ROMs while still having good homebrew support (for movies, music & pix)

also, is there a certain type/brand of microSD that gives better performance with a specific cart?

is there a perfered retailer or order from (US location)?

thanks in advance

-morf

There is no difference between the R4DS and the M3 Simply. It's the exact same hardware, short of a few bridged jumpers (pun intended). The newer revisions don't have the jumper to switch between R4 and M3, but it's still the same hardware. R4 is the manufacturer of both devices and they release firmware updates first, followed by M3 a day or two later.

As far as micro sd cards goes, Kingston/Toshiba SD-C01G Japan cards are the best.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The better these AI models get, the more this is going to happen. It's gonna turn into government versus government in regards to using proprietary and unavailable security research models to basically find flaws and vulnerabilities in other governments or companies systems. It's basically turning into a cybersecurity arms race. This is actually a good thing. The better AI gets, the more restricted and expensive it's going to become, making it far less mainstream. This is good 👍
    • Crazy. The government fired everyone who was capable of actually understanding this. More security theater. Just checked it is gone from Claude.
    • bring trump to the board, then apple will have some innovation to talk about
    • Microsoft released Windows 11 KB5094149 / KB5095971 / KB5094156 Setup, Recovery updates by Sayan Sen Earlier this week Microsoft released its newest Patch Tuesday updates (KB5094126 / KB5093998 on Windows 11 and KB5094127 on Windows 10). Alongside those, Microsoft also released new dynamic updates. These Dynamic Update packages are meant to be applied to existing Windows images prior to their deployment. Dynamic Updates also help preserve Language Pack (LP) and Features on Demand (FODs) content during the upgrade process. VBScript, for example, is currently an FOD on Windows 11 24H2. This time both recovery and setup updates were released for Windows 11 as well as Windows 10. The company writes: "KB5095185: Safe OS Dynamic Update for Windows 11, version 26H1: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.28000.2269. KB5094149: Safe OS Dynamic Update for Windows 11, versions 24H2 and 25H2: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.26100.8655 KB5095971: Setup Dynamic Update for Windows 11, version 23H2: June 9, 2026 This update makes improvements to Windows setup binaries or any files that setup uses for feature updates in Windows 11, version 23H2. KB5094156: Safe OS Dynamic Update for Windows 11, version 23H2: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.22621.7219 KB5098815: Windows Recovery Environment update for Windows 10, version 21H2 and 22H2: June 9, 2026 This update automatically applies Safe OS Dynamic Update (KB5094154) to the Windows Recovery Environment (WinRE) on a running PC. The update installs improvements to Windows recovery features. KB5094154: Safe OS Dynamic Update for Windows 10, versions 21H2 and 22H2: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.19041.7417. KB5094153: Safe OS Dynamic Update for Windows 10, version 1809 and Windows Server 2019: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.17763.8880. KB5094152: Safe OS Dynamic Update for Windows 10, version 1607 and Windows Server 2016: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.14393.9234." Microsoft notes that both the Recovery and Setup updates will be downloaded and installed automatically via the Windows Update channel.
    • Quantum Error Correction Validated in Nature: Microsoft and Quantinuum Log 800-Fold Improvement Two years after the original press-release announcement, independently peer-reviewed results published in Nature on June 10, 2026, have confirmed that Microsoft and Quantinuum achieved an 800-fold reduction in quantum error rates on real trapped-ion hardware — the largest gap between physical and logical error rates ever independently validated.    What Quantum Error Correction Actually Does — and Why Breaking Even Is Hard https://www.techtimes.com/articles/318329/20260613/quantum-error-correction-validated-nature-microsoft-quantinuum-log-800-fold-improvement.htm   Quantum Computing Wiring Bottleneck Cracked by HKU Silicon Carbide Chip at Qubit Temperature Engineers at the University of Hong Kong have built the first cryogenic control chip that operates at the same temperature as superconducting qubits — 10 millikelvin, or just one-hundredth of a degree above absolute zero — without generating the heat that has forced every competing approach to park its electronics hundreds of meters of cable away. https://www.techtimes.com/articles/318325/20260613/quantum-computing-wiring-bottleneck-cracked-hku-silicon-carbide-chip-qubit-temperature.htm  
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      175
    3. 3
      PsYcHoKiLLa
      139
    4. 4
      ATLien_0
      91
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!