The Official NDS Homebrew Thread


Recommended Posts

There is no difference between the R4DS and the M3 Simply. It's the exact same hardware, short of a few bridged jumpers (pun intended). The newer revisions don't have the jumper to switch between R4 and M3, but it's still the same hardware. R4 is the manufacturer of both devices and they release firmware updates first, followed by M3 a day or two later.

As far as micro sd cards goes, Kingston/Toshiba SD-C01G Japan cards are the best.

I have to agree. Kingston MicroSD cards from Japan (I haven't tried Toshiba) are the best I've ever used.

I was having constant issues in Castlevania: Portrait of Ruin (freezing), and also Tony Hawk's Downhill Jam (graphic flickering/issues) with an 80X ATP MicroSD card, and a Kingsmax MicroSD (which has won bloody awards).

But once I started using that Kingston card those problems are gone. Even the intro video of Dawn of Sorrow runs perfectly. It's definitely the best card for the DS Lite.

(I'm using the M3 DS Simply btw).

Funny, I been thinking about getting a DS Lite and grabbing a flash cart online.

So what would be the best cart out atm, regardless of price?

Any opinions on the G6 Lite ?

Well if you don't need GBA support, the best is the R4 or M3 DS Simply (both the same hardware). I can't state my opinion on the G6 Lite since I've never used it, but the M3 DS Simply is definitely a great cart solution.

Also the M3 DS Simply acts as a Passcard, so if you decide in the future to purchase a cart for the GBA slot you can use the M3 to boot it.

If you're worried about cost.. The G6 Lite + a Passcard will run you about $100 USD. The M3 DS Simply is around $45 (that's without a MicroSD card however), but if you purchase a cheap MicroSD card it will cost you far less then the G6. Plus the G6 is 4Gigabit (which is only 512mb), so a 1GB MicroSD card will offer more space.

Thanks for the quick reply.

But yea, I would like to be able to retain support for both nds, and gba software.

So for this I would have to go with an M3 + Passcard, correct? (ohh and purchase a seperate MicroSD card for better space)

Thanks for the quick reply.

But yea, I would like to be able to retain support for both nds, and gba software.

So for this I would have to go with an M3 + Passcard, correct? (ohh and purchase a seperate MicroSD card for better space)

The M3 is an all-in-one device. No passcard necessary. But I think you actually meant the G6 Lite (since that is the solution which gives you GBA support) + a passcard. You need both for the G6 solution.

Is it possible to get both an R4 DS, and an M3 Lite and have them work together ? Compatibility issue ?

Also, wouldn't this mean an ish load of more capacity ? 2Gig SD in each = 4Gig ?

Reason I ask is because im leaning more toward the R4 but would like to be able to still play my gba roms.

Is it possible to get both an R4 DS, and an M3 Lite and have them work together ? Compatibility issue ?

Also, wouldn't this mean an ish load of more capacity ? 2Gig SD in each = 4Gig ?

Reason I ask is because im leaning more toward the R4 but would like to be able to still play my gba roms.

Well the R4 is the same hardware and uses the same O.S. as the M3 DS Simply, and it gives you the option when you boot with it to load a slot-2 device (which means a device such as the G6 lite).

And yes they would work together. The only thing the R4 does with slot-2 is act as a Passcard to boot into the G6 Lite. Once you've booted into your G6 you can use it as you wish.

But you will be paying quite a bit. You have to buy an R4 + MicroSD card, and also the G6 Lite. Granted you would have quite a bit of space. You can get MicroSD cards anywhere from 128mb to 2gb (there's supposed to be 4gb out soon too), and the G6 will give you 512mb.

If I had that setup I'd only stick the GBA roms + Homebrew on the G6 Lite (the Slot-1 carts like the R4 or M3 DS simply don't have very good homebrew support since most homebrew applications haven't been rewritten for them yet), and of course leave the NDS for strictly the R4.

Btw the G6 only has built-in memory. You can't use any memory cards with it. If you want a Slot-2 device (for GBA) that uses MicroSD you should grab the Supercard Lite, it's similar but uses MicroSD instead of built-in memory.

Edited by MadFerIt2006
Is it possible to get both an R4 DS, and an M3 Lite and have them work together ? Compatibility issue ?

Also, wouldn't this mean an ish load of more capacity ? 2Gig SD in each = 4Gig ?

Reason I ask is because im leaning more toward the R4 but would like to be able to still play my gba roms.

I would suggest waiting for more information on the M3 Real. Rumor has it that it will be a slot-1/slot-2 combo solution, with a cart going in both slot-1 and slot-2, allowing you to run GBA from slot-2. This is just a rumor so far though. More info should be available soon.

I would suggest waiting for more information on the M3 Real. Rumor has it that it will be a slot-1/slot-2 combo solution, with a cart going in both slot-1 and slot-2, allowing you to run GBA from slot-2. This is just a rumor so far though. More info should be available soon.

If that's true hopefully it will be backwards compatible with the M3 DS Simply. And hopefully it's cheap.. The slot-2 solutions tend to be very pricey. You would think the all-in-one slot-1 solutions would be more expensive then the old passcard + slot-2 cart solution.. Although the GBA support with slot-2 devices is impressive. I wouldn't mind picking up a cheap gba solution for slot-2 (that doesn't stick out of the system) alongside of my current M3 Simply.

I didn't say it was, I said it reminded me of it when I saw it.

You might want to go ask around at GBA-Dev to see if anyone would be interested in creating a homebrew version, some people might be looking for inspiration or a new project to work on.

I didn't say it was, I said it reminded me of it when I saw it.

You might want to go ask around at GBA-Dev to see if anyone would be interested in creating a homebrew version, some people might be looking for inspiration or a new project to work on.

Thanks, I'll make a post. I doubt anything could happen of it because access to the spin files has been 403'd and getting hold of the music and legally is another issue.

I would suggest waiting for more information on the M3 Real. Rumor has it that it will be a slot-1/slot-2 combo solution, with a cart going in both slot-1 and slot-2, allowing you to run GBA from slot-2. This is just a rumor so far though. More info should be available soon.

I finally ordered my R4 Ds...should be around in the next few days... :jump:

Ok...A question on the R4... Will the R4 act as a passcard even if it doesnt have a micro sd card inserted...???...

I was thinking that if it did, all I would need is either a 2 gig or 4 gig micro sd card that I could swap between the slot 1 and slot 2 device. :unsure:

Anyway, could someone please recommend a cheap slot 2 flash cart...

Thanks in advance...

I finally ordered my R4 Ds...should be around in the next few days... :jump:

Ok...A question on the R4... Will the R4 act as a passcard even if it doesnt have a micro sd card inserted...???...

I was thinking that if it did, all I would need is either a 2 gig or 4 gig micro sd card that I could swap between the slot 1 and slot 2 device. :unsure:

Anyway, could someone please recommend a cheap slot 2 flash cart...

Thanks in advance...

It won't boot without the micro sd card in, but after it loads up you can take the card out and passme, or you could just passme and then take the card out. Or you can flashme the ds. I know most people don't recommend flashme, but I use it along with my R4 for download play and to get rid of the health and safety screen.

As far as a cheap slot 2 goes, I'd say the ez4 would be what you are looking for.

Hi guys,

What are your opinions on a Ninjapass X9TF... before I order one that is.

Junk. Get a R4DS or M3 Simply. Also, superkey isn't a slot 1 solution, it's a passme device for booting a slot 2 cart. I haven't heard anything good about bamboogaming either. Seems a lot of their orders get "lost" in the mail.

Use GBAtemps slot 1 comparison tool to decide which is best.

http://gbatemp.net/index.php?dynamic=39

It has trouble with some games, there is virtually no homebrew support, no DLDI support, no multimedia features, it doesn't automatically create save files, you have to do it yourself, etc.

GBAtemp gave it a 5.5/10 compared to R4DS 9/10.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Win11Debloat 2026.06.14 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 2026.06.14 changes: This is a minor release that hopefully addresses the false positives in Windows Defender and Bitdefender that prevented users from downloading and/or running Win11Debloat. Refactor Get-RegFileOperations.ps1 to address false positives by @Raphire in #626 Add logging around WinGet app retrieval and increase timeout to 20s by @Raphire Download: Win11Debloat 2026.06.14 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Still using Microsoft Money 2005 in 2026 here!
    • I have a couple to mention, and they still run great on Windows 11 Adobe Lightroom Version 2 Alcohol 120% CLZ Book, Comic, Game, Movie, & Music Collector (PC - No longer sold / Grandfathered in - now mobile apps/online only) DVDDecrypter ISO Buster Pro version 1.9.1 (Still supports HD-DVD too) Nero Burning Rom 8 (Only the burning software, no backup, media converter, etc)   OpenAL (Runtime) - GuildWars 1 Reforged still uses it for 3d headphone audio PowerDVD 12 Ultra SPTD (SCSI Pass through Direct Driver) UltraISO Windows Media Encoder 9 WinImage You can tell I still sport an optical drive    
    • Linux 7.1 arrives with an NTFS overhaul and major hardware performance boosts by Paul Hill The founder of the Linux kernel has just announced the availability of Linux 7.1. This is a stable version of the kernel that will now be tested by various Linux distributions before it is shipped to users through update managers. Some users, like those on Debian, for example, might not get it for a long time, if at all, while Fedora users can expect it in the near future. With Linux 7.1 out on time, the merge window for Linux 7.2 is now open, giving contributors the opportunity to send in major new features that have been waiting for the last two months. Torvalds warned that he is currently travelling and will be in another timezone, so timing for the merge window may be irregular due to timezone differences and limited internet access. Torvalds said that he has already fetched early pull requests to allow him to do some offline work, but the travel could still cause disruption. Right now, he is not planning to extend the release, but did consider it. He said he might later regret not extending, though. In terms of this last week of development for Linux 7.1, Torvalds said there were no major or alarming changes. This week consisted mostly of smaller driver updates to GPU, networking, and sound, networking fixes, trace tooling fixes, and misc minor fixes. The shortlog this week lists fixes for driver bugs, memory leaks, I/O and USB fixes, networking and RDMA fixes, DRM/graphics fixes, and tooling and verification improvements. Specific fixes include USB series heap-overflow and buffer overflow fixes, and multiple use-after-free, memory-leak, and refcount corrections across subsystems such as i2c, zram, gpio, and net. There are fixes for graphics drivers, including amdgpu, i915, and virtio, as well as hypervisor and virtualization tweaks affecting mshv, vmbus, and hyperv. According to Phoronix, anyone running Linux 7.1 should look out for the new NTFS driver, Intel FRED for improved performance on Panther Lake and future CPUs, faster graphics with Intel Arc Battlemage, and improvements for older AMD Radeon GPUs. If you are running Linux on your computer and everything is fine, then you don’t need to worry about updating to Linux 7.1 as a priority; just wait for it to be pushed to you. If you have tried Linux on hardware but it didn’t work properly, trying again with a distro that uses Linux 7.1 could cause Linux to work on your machine, thanks to the new hardware support.
    • you can also do this with this tool: PowerSettingsExplorer made by mbk1969 at 3dguru forum.. I found it by accident researching on modern standby and annoying quirks of it in 2022
  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      197
    3. 3
      PsYcHoKiLLa
      139
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!