The Official NDS Homebrew Thread


Recommended Posts

Wow. Cool to see it finally stickied. I'd also like to thank everyone who has contributed. Especially since I stopped updating it. It's really cool that you all have kept it going. I should really update the first post. It's pretty dated. Maybe I'll to that on my next day off.

Hey,

Ordered a DS Lite + R4, will DS Organize run on it?

Thanks.

I forgot to mention something. You should be aware of the fact that DS Organize (even the latest version) has a tendency to corrupt files and directories. Often requiring one to format their TF card. Use with caution and always have a current backup of your card on hand.

Anyone else using R4DS? I just got one for like ?20 and it works great! I'm looking for some decent skins... anyone know of any?

BTW, I haven't had time to mess around with it yet, but what is the last icon for on the main menu (I think this applies to both R4DS and M3 Simply devices aswell), I think it says Boot slot 2 or something? Is this for the GBA slot?

Edited by NegaC

Most homebrew runs on the R4 to be honest, I haven't come across anything I use that needs a Slot-2 card yet, you just need to do something called a DLDI patch to the nds files sometimes. You do need a slot 2 for GBA games though if you're talking about backup images, I don't have a slot 2 though so someone else is best answering where to get one from.

I have an R4DS but what would be the best slot-2 device to run alongside my R4? And where could I buy one in the UK? I've heard good things about the M3 Lite... would that work with the R4DS? I'm not too knowledgeable about this DS homebrew business, but the R4DS works as a passme device?

I have an original DS btw.

Most homebrew runs on the R4 to be honest, I haven't come across anything I use that needs a Slot-2 card yet, you just need to do something called a DLDI patch to the nds files sometimes. You do need a slot 2 for GBA games though if you're talking about backup images, I don't have a slot 2 though so someone else is best answering where to get one from.

The whole problem with the R4/M3 DS Simply was just temporary. Both cards came out at the end of 2006, and most of the homebrew hadn't been updated to this new DLDI system. Now most of them are updated, and the only one's that no longer function are the programs that were discontinued/no longer updated.

As for the limitations of Slot-1 solutions, the only real issues is a lack of GBA rom support. Also, discontinued GBA homebrew obviously wouldn't work with a DS card.

  • 4 weeks later...
Well... thanks. I hope the author will fix it soon. It looks promising :)

I don't know what cart you are using, but someone posted a version of 0.3e over at GBAtemp. It worked on my R4 after I DLDI patched it.

http://gbatemp.net/index.php?showtopic=50523

  • 3 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Here is how I fixed Windows 11 not booting after clean installation by Taras Buria Story time. A couple of weeks ago, I experienced a very odd thing with my computers. I was trying to reinstall Windows 11 on my primary device, and everything was going smoothly until the installer performed the first restart. After that, my computer entered the boot disk selection screen instead of continuing the setup process. Huh, that's odd, said I, and selected Windows Boot Manager only to see it fall back into the same screen right away. Then I tried booting from the USB drive with the same result—the PC kept returning to the boot device selection screen, and removing the drive would send my PC to UEFI, again, with no way to launch Windows 11. I fired up my spare laptop, which has been sitting unused for quite a while, to see if I am dealing with a defective USB drive. Nope, Windows 11 installed and started without issues. After trying another drive and checking all the possible settings in UEFI, I decided to try disabling Secure Boot. Lo and behold, Windows 11 started as it should have been in the first place, continued the setup process, and reached the initial setup screen. Victory! After I finished the setup and applied all updates, I re-enabled Secure Boot, and Windows 11 started without issues. Some time later, I tried reinstalling Windows 11 on my laptop only to experience similar issues, with UEFI claiming a Secure Boot violation. I checked whether the drive works on my main PC, and yes, it installed Windows 11 without errors. I scratched my head, went to UEFI, turned off Secure Boot, and installed Windows 11 without issues. After that, I enabled Secure Boot. Note: I used the official Media Creation Tool app for my USB drive. Also, UEFI was properly configured for Windows 11, including no Legacy Mode, a GPT-partitioned drive, and TPM and Secure Boot enabled. From my experience, if you are dealing with similar symptoms, I recommend two things: If you use old Windows 11 install media, create a new one with the latest Windows 11 release, especially if you know your PC already has the latest Secure Boot certificates. If you cannot create a new one, turn off Secure Boot, complete the installation, download all available updates, and then re-enable Secure Boot in UEFI. Note that you need to turn off Secure Boot after installing Windows 11. Otherwise, the installer won't run, claiming a hardware requirements mismatch. I believe the problem hides in Secure Boot certificates that expire this month. Microsoft is currently rolling out new certificates, and maybe a mismatch was causing these issues for both of my systems. I am out of my depth to make a definitive statement; this article is flagged as "Opinion," as I only share my experience and some tips on how to fix the problem. If some of you possess deeper knowledge and understanding of the situation, please share it in the comments. As for everyone else struggling with computers not booting after a clean install, the two steps above should get you out of the pickle.
    • I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
    • ive always been fascinated by old software this is an old video player for windows from apple
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!