The Official NDS Homebrew Thread


Recommended Posts

WOOOHHHHHOOOO

I got my R4 DS two hours ago...And all I can say is Thanks to the guys that recommended it... ;)

Only had a chance to check out my backups...But so far so good...

Can wait to try out some homebrew stuff... :cool:

So I got my DS lite along with my R4DS and a 1gb microSD. I must admit... I'm loving the R4DS

it's fast, supports soft reset in games, supports sleep mode (when you close the lid in the middle of the game).

But now I'm afraid to download homebrew apps 'cause of the bricking virus for the DS :(

Does anyone have any suggestions to make sure I avoid this like the plague?

Any good anti-virus that detects it?

So I got my DS lite along with my R4DS and a 1gb microSD. I must admit... I'm loving the R4DS

it's fast, supports soft reset in games, supports sleep mode (when you close the lid in the middle of the game).

But now I'm afraid to download homebrew apps 'cause of the bricking virus for the DS :(

Does anyone have any suggestions to make sure I avoid this like the plague?

Any good anti-virus that detects it?

If you get your homebrew from the sources listed on the 1st page, I'm pretty sure you wont have any problems...just stick to the reputable sources...I got my homebrew stuff from those links, and no problems so far, ok I lie, I cant get some of them to work... Edit: But I havent bricked my DS...

Have to go through the DLDI tutorial again :blush:

No amount of DLDI patching will help apps work if they haven't been coded with DLDI support in mind. DLDI is fairly new on the scene and lots of homebrew just isn't written for anything other than the old slot-2 methods. Give it time and authors still developing their apps should add DLDI in due time.

As far as the virus goes, I wouldn't worry about it. Just stick to reputable sources and read comments before installing anything. You could also flashme your DSL if you're that worried about it.

No amount of DLDI patching will help apps work if they haven't been coded with DLDI support in mind. DLDI is fairly new on the scene and lots of homebrew just isn't written for anything other than the old slot-2 methods. Give it time and authors still developing their apps should add DLDI in due time.

As far as the virus goes, I wouldn't worry about it. Just stick to reputable sources and read comments before installing anything. You could also flashme your DSL if you're that worried about it.

Oh ok...

Yeah, the DSorganize I got just freezes after searching for the supercard and m3 settings...

Btw, can you play over wifi using backups?

Oh, and what is the minimum internet connection that you will require to play smoothly online...?

Edit: Thanks in advance

Oh ok...

Yeah, the DSorganize I got just freezes after searching for the supercard and m3 settings...

Btw, can you play over wifi using backups?

Oh, and what is the minimum internet connection that you will require to play smoothly online...?

Edit: Thanks in advance

With the M3 DS Simply pretty much any game will work with Wifi, with no real issues. However, download play seems to have issues with certain games.

As for the internet connection.. I honestly can't tell you. I have a 10mbps download/684kbps upload connection and it's usually smooth.. But it depends on the game, plus where the individuals you're playing live (and trust me, considering how massive the DS is in Japan, you will get matched up with them often lol).

Hey peoples,

I'm going to buy one of these for my GBASP:

http://www.bamboogaming.com/flash-cards/su...ion/prod_3.html

It says it supports up to 1GB SD card, if I bought a 4GB SD card, will it work.

Sometimes the description is out of date, and I know my PDA says supports up to 512MB SD card, and I have a 1GB in there and works fines.

So yeah, what do you think?

I used to play DS online with 56k and usually it was fine (though the voice chat in Metroid didn't work, and Metroid is what displayed lag if any game did)

Kewl...will have to try it out somewhere...

Problem is I cant afford an internet connection like ADSL or higher, because here in South Africa, our state owned monopoly phone company, Telkom, is bleeding us dry...Telkom - Wikipedia I mean most of the lines are capped :angry:

Ok, gonna get an aneurism if i continue...

With the M3 DS Simply pretty much any game will work with Wifi, with no real issues. However, download play seems to have issues with certain games.

As for the internet connection.. I honestly can't tell you. I have a 10mbps download/684kbps upload connection and it's usually smooth.. But it depends on the game, plus where the individuals you're playing live (and trust me, considering how massive the DS is in Japan, you will get matched up with them often lol).

lol...yeah, dont wanna face a Japanese guy in any game right now, still getting used to mario kart...Love that game.

Looks like they changed the packaging on the M3 Simply. Mine is very different.

Yea, they seem to no longer be including the White casing. Lucky for me, i got the black DS.

The Lite on the other hand, came with 5 Cases. White, pink, navy, black, light green i think it is.

  • 2 weeks later...

alright, i read a few of the pages, but i'm still not 100% sure.

Anywho, i got a ndsl for my bday from my girlfriend, but basically i want to get a m3simply, would that be everything i need to play homebrew & backups? also if i wanted to play gba would i need only need the m3lite?

thanks in advance.

alright, i read a few of the pages, but i'm still not 100% sure.

Anywho, i got a ndsl for my bday from my girlfriend, but basically i want to get a m3simply, would that be everything i need to play homebrew & backups? also if i wanted to play gba would i need only need the m3lite?

thanks in advance.

If you get the M3Simply or the R4DS (like mine :D ), then all you would need is the micro sd memory to run your homebrew / backups...

If you have the M3Simply, it would act as a passme device, then you would only need the gba flashcart like the m3lite...But if you dont have the M3simply, then you would need to buy a passme device to boot the m3lite...

So if you want to get the M3simply AND want to play gba backups then you would need-:

M3simply (DS backups and as a passme for the gba slot)

M3Lite (Gba backups)

2 micro sd cards, one for the Simply and one for the lite...

Hope this was helpful... ;)

Ok guys...The text reader in Moonshell ****es me off...!!!...Its too small, and only displays on one screen.

What I want to know is, am I just being an idiot, and there is a way in moonshell to dislay the text on both screens and a lot larger? OR is there another app I can get where the text can be displayed better?

What would be IDEAL is for an app to display the text in the same way as the "Reading Aloud" exercise in Dr Kawashima's Brain Training...

Thanks guys...

Does anyone know of any homebrew apps for slot 1 cards to extract or change save data on a GBA game in slot 2? Is it even possible?

I don't think anyone has accomplished that sorry. I could be wrong, but the Slot-1 to Slot-2 communication seems to be very limited, even within games with support.

There seems to be some big bandwidth problem with the GBA slot that causes problems with Slot-1. That's why if you only have a slot-1 card solution, it can't play any gba content (homebrew or otherwise). I wish it wasn't the case lol.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Here is how I fixed Windows 11 not booting after clean installation by Taras Buria Story time. A couple of weeks ago, I experienced a very odd thing with my computers. I was trying to reinstall Windows 11 on my primary device, and everything was going smoothly until the installer performed the first restart. After that, my computer entered the boot disk selection screen instead of continuing the setup process. Huh, that's odd, said I, and selected Windows Boot Manager only to see it fall back into the same screen right away. Then I tried booting from the USB drive with the same result—the PC kept returning to the boot device selection screen, and removing the drive would send my PC to UEFI, again, with no way to launch Windows 11. I fired up my spare laptop, which has been sitting unused for quite a while, to see if I am dealing with a defective USB drive. Nope, Windows 11 installed and started without issues. After trying another drive and checking all the possible settings in UEFI, I decided to try disabling Secure Boot. Lo and behold, Windows 11 started as it should have been in the first place, continued the setup process, and reached the initial setup screen. Victory! After I finished the setup and applied all updates, I re-enabled Secure Boot, and Windows 11 started without issues. Some time later, I tried reinstalling Windows 11 on my laptop only to experience similar issues, with UEFI claiming a Secure Boot violation. I checked whether the drive works on my main PC, and yes, it installed Windows 11 without errors. I scratched my head, went to UEFI, turned off Secure Boot, and installed Windows 11 without issues. After that, I enabled Secure Boot. Note: I used the official Media Creation Tool app for my USB drive. Also, UEFI was properly configured for Windows 11, including no Legacy Mode, a GPT-partitioned drive, and TPM and Secure Boot enabled. From my experience, if you are dealing with similar symptoms, I recommend two things: If you use old Windows 11 install media, create a new one with the latest Windows 11 release, especially if you know your PC already has the latest Secure Boot certificates. If you cannot create a new one, turn off Secure Boot, complete the installation, download all available updates, and then re-enable Secure Boot in UEFI. Note that you need to turn off Secure Boot after installing Windows 11. Otherwise, the installer won't run, claiming a hardware requirements mismatch. I believe the problem hides in Secure Boot certificates that expire this month. Microsoft is currently rolling out new certificates, and maybe a mismatch was causing these issues for both of my systems. I am out of my depth to make a definitive statement; this article is flagged as "Opinion," as I only share my experience and some tips on how to fix the problem. If some of you possess deeper knowledge and understanding of the situation, please share it in the comments. As for everyone else struggling with computers not booting after a clean install, the two steps above should get you out of the pickle.
    • I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
    • ive always been fascinated by old software this is an old video player for windows from apple
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!