Recommended Posts

Not as impressive as I had hoped. Oh well, work in progress :)

Well black isn't impresisve in WLM,blue is my favorite. In black u can't see the boders well defined,on the other hand blue shows a better work,depends on the preferences each user has though.

post-69181-1180363598.png

Edited by EduardValencia

Wish the newest Mac version would get leaked. :( I suppose it will come with Office 2008 later this year.

yeah they can make it like this right out of the box

wlmbetaWJFN.png

It wouldn't make any sense on Microsoft's side. They need an income for the messenger somehow and placing that ads on are what generates it.

I don't see how you can complain so much about the ads anyways. Yes, ok, the contact list has a giant(ish) one at the bottom but really, looking at it, it's not that big. Compared to half of the ads I see while I surf the net (I know....I know.... 'ad-block' but I'm tired of destroying revenue to legit websites) this ad is tiny.

And then what is wrong with a single line of text on the bottom of your contact windows? It's honestly like a size 11 font sentence that REALLY isn't that distracting.

Like unless you are using a 800x600 monitor, the ads really arien't that distracting. Ok I could see a 1024x768 being a bit annoying but my message to that is to get a bigger, better monitor. You're long overdue anyways.

Anyways back on topic. FINALLY got it installed (XP SP2 32Bit) and I have to say that I am REALLY liking the interface. I just can't wait to see which new features are going to be put in (which again....you guys talk about "bloatware"....with highspeed connections and the size of hard disks nowadays, who cares? If you want slim and extremely light packages...go back to 3.11 and use email to contact.....the world can't stay 1.5mb forever and still improve a messenger)

It wouldn't make any sense on Microsoft's side. They need an income for the messenger somehow and placing that ads on are what generates it.

I don't see how you can complain so much about the ads anyways. Yes, ok, the contact list has a giant(ish) one at the bottom but really, looking at it, it's not that big. Compared to half of the ads I see while I surf the net (I know....I know.... 'ad-block' but I'm tired of destroying revenue to legit websites) this ad is tiny.

And then what is wrong with a single line of text on the bottom of your contact windows? It's honestly like a size 11 font sentence that REALLY isn't that distracting.

Like unless you are using a 800x600 monitor, the ads really arien't that distracting. Ok I could see a 1024x768 being a bit annoying but my message to that is to get a bigger, better monitor. You're long overdue anyways.

Anyways back on topic. FINALLY got it installed (XP SP2 32Bit) and I have to say that I am REALLY liking the interface. I just can't wait to see which new features are going to be put in (which again....you guys talk about "bloatware"....with highspeed connections and the size of hard disks nowadays, who cares? If you want slim and extremely light packages...go back to 3.11 and use email to contact.....the world can't stay 1.5mb forever and still improve a messenger)

i just dont like ads, i use gaim/pidgin but when i need to use the webcam i have to switch and i dont want taht stupid thing flashing stupids ads

So, can someone please tell me how to get this installed, as the forum it points to when downloaded -- to get the instructions on installing it -- is no longer up...I get to 35% and it errors out; I see a lot of people have gotten it installed so there's got to be someone who can tell me how?!

Too remove the ads at the bottom:

4004-923 line 177 find:

CODE

<Element layoutpos=bottom layout=borderlayout() padding=rect(4,0,4,0)>

<Constrainer layoutpos=top ID=Atom(SSConstrainer) Layout=FillLayout()>

<SlideShowWithAd ID=Atom(AdBanner) Layout=BorderLayout() Padding=Rect(0,0,8,3) Active=Mouse>

<Element Layout=BorderLayout() LayoutPos=Top>

<Element ID=Atom(SSTitle) ContentAlign=MiddleLeft|EndEllipsis Padding=Rect(8,0,0,6) LayoutPos=Left Tooltip=True Accessible=True AccRole=42 Active=MouseAndKeyboard/>

</Element>

replace with:

CODE

<Element layoutpos=none layout=borderlayout() padding=rect(4,0,4,0)>

<Constrainer layoutpos=top ID=Atom(SSConstrainer) Layout=FillLayout()>

<SlideShowWithAd ID=Atom(AdBanner) Layout=BorderLayout() Padding=Rect(0,0,8,3) Active=Mouse>

<Element Layout=BorderLayout() LayoutPos=Top>

<Element ID=Atom(SSTitle) ContentAlign=MiddleLeft|EndEllipsis Padding=Rect(8,0,0,6) LayoutPos=Left Tooltip=True Accessible=True AccRole=42 Active=MouseAndKeyboard/>

</Element>

Check out the post over at mess.be haha

The problem with leaks is that a lot of mirrors pop up out of nowhere and you can never really trust them to still provide the authentic stuff. In this case, even the proclaimed leaker abused its increased popularity to bundle ads into the Windows Live Messenger 8.5 installer at the disadvantage of you guys.

In order to protect overexcited but unwary Messers from compromising their systems with unwanted garbage, I'm going to refer to the rather popular Digg of our story (hijacked by a Neowinian apparently!). In its comments you'll find a dozens of mirrors but there's one in particular that can be trusted.

Note that we always advise against downloading leaked internal or beta builds, but with attention that this leak is getting in the blogosphere we can only ring the alarm for the inevitable group who gives the cold shoulder to our advise.

What we do recommend is that you all sign up for the official new Windows Live Messenger beta program over at connect.microsoft.com (thanks for the link the.exe.ecutioner & anonymouse91). If you get selected, you'll be able to voluntarily but actively participate in the development of your favorite IM software. Sounds just like the job for you, am I right?

Remove bottom ads in convo:

Reshack msgres.dll > 4004 > 920

Find : adbannergutter

replace "Bottom" by "none" in the same line

&lt;Element layoutpos=bottom layout=filllayout() id=atom(adbannergutter)&gt;

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Here is how I fixed Windows 11 not booting after clean installation by Taras Buria Story time. A couple of weeks ago, I experienced a very odd thing with my computers. I was trying to reinstall Windows 11 on my primary device, and everything was going smoothly until the installer performed the first restart. After that, my computer entered the boot disk selection screen instead of continuing the setup process. Huh, that's odd, said I, and selected Windows Boot Manager only to see it fall back into the same screen right away. Then I tried booting from the USB drive with the same result—the PC kept returning to the boot device selection screen, and removing the drive would send my PC to UEFI, again, with no way to launch Windows 11. I fired up my spare laptop, which has been sitting unused for quite a while, to see if I am dealing with a defective USB drive. Nope, Windows 11 installed and started without issues. After trying another drive and checking all the possible settings in UEFI, I decided to try disabling Secure Boot. Lo and behold, Windows 11 started as it should have been in the first place, continued the setup process, and reached the initial setup screen. Victory! After I finished the setup and applied all updates, I re-enabled Secure Boot, and Windows 11 started without issues. Some time later, I tried reinstalling Windows 11 on my laptop only to experience similar issues, with UEFI claiming a Secure Boot violation. I checked whether the drive works on my main PC, and yes, it installed Windows 11 without errors. I scratched my head, went to UEFI, turned off Secure Boot, and installed Windows 11 without issues. After that, I enabled Secure Boot. Note: I used the official Media Creation Tool app for my USB drive. Also, UEFI was properly configured for Windows 11, including no Legacy Mode, a GPT-partitioned drive, and TPM and Secure Boot enabled. From my experience, if you are dealing with similar symptoms, I recommend two things: If you use old Windows 11 install media, create a new one with the latest Windows 11 release, especially if you know your PC already has the latest Secure Boot certificates. If you cannot create a new one, turn off Secure Boot, complete the installation, download all available updates, and then re-enable Secure Boot in UEFI. Note that you need to turn off Secure Boot after installing Windows 11. Otherwise, the installer won't run, claiming a hardware requirements mismatch. I believe the problem hides in Secure Boot certificates that expire this month. Microsoft is currently rolling out new certificates, and maybe a mismatch was causing these issues for both of my systems. I am out of my depth to make a definitive statement; this article is flagged as "Opinion," as I only share my experience and some tips on how to fix the problem. If some of you possess deeper knowledge and understanding of the situation, please share it in the comments. As for everyone else struggling with computers not booting after a clean install, the two steps above should get you out of the pickle.
    • I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
    • ive always been fascinated by old software this is an old video player for windows from apple
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!