Welcome to Finity forums beta test


Recommended Posts

But it's infuriating trying to find the first non-pinned thread. I've seen and read the stickies, I don't need them to keep getting in my way. If people do break the rules by ignoring the important threads, that is their problem.

Just glance at the side of the threads at the top. They all have a 'sticky' icond (I think it's a piece of paper with a pin through it), so you can easily tell if a topic is sticked and the ones that aren't.

I think we will get used to this :)

Just glance at the side of the threads at the top. They all have a 'sticky' icond (I think it's a piece of paper with a pin through it), so you can easily tell if a topic is sticked and the ones that aren't.

I think we will get used to this :)

Well, I'm of the opinion that if you can make something more usable with a couple of simple tweaks, you should go ahead and do it. I don't see why you'd be against making the theme easier to use.

Did you click Control Panel?

Damn you, I only hovered it. :laugh:

Another question: On the Shift skin you could perfectly see the "0 new messages" message which turned red when you had one or more unread messages. I can't find that feature in the new skin. It would be nice to have it or do you get another handy - no popup/no mail - notification? This is no critique, just a tip.

EDIT: You guys will start hating me now. When I click on a topic title on the "latest activity" it automatically takes me to the first post of the topic while I'd rather have the latest new post. Is this normal? When I click the "arrow" everything is fine but when I click the title it's not. Well, to me it's not.

Edited by Couch Potato
Another question: On the Shift skin you could perfectly see the "0 new messages" message which turned red when you had one or more unread messages. I can't find that feature in the new skin. It would be nice to have it or do you get another handy - no popup/no mail - notification? This is no critique, just a tip.

You'll see a cool little orange starburst shape next to "Control Panel" with the number of new messages you have ;)

EDIT: You guys will start hating me now. When I click on a topic title on the "latest activity" it automatically takes me to the first post of the topic while I'd rather have the latest new post. Is this normal? When I click the "arrow" everything is fine but when I click the title it's not. Well, to me it's not.

This is how it's supposed to be. You can click the arrow or "Last by" to go to the latest post, or click the thread title to go to the first post.

You'll see a cool little orange starburst shape next to "Control Panel" with the number of new messages you have ;)

Great, good to hear that. Sorry about all the questions, I'm just trying to help out with little "look-overs" you may have had. ;)

This is how it's supposed to be. You can click the arrow or "Last by" to go to the latest post, or click the thread title to go to the first post.

Ah okay. However, to bug you guys once again, would it be possible to set a preference of the maximum amount of topics that appear in the list? I feel, though this is purely a matter of preference, the list is a little "too long".

*Now I'll stop irritating you guys* :laugh:

Ah okay. However, to bug you guys once again, would it be possible to set a preference of the maximum amount of topics that appear in the list? I feel, though this is purely a matter of preference, the list is a little "too long".

That would be up to the devs ;)

I always had the old one at 10 anyway, but I can understand why one might want to have it shorter than that.

That would be up to the devs ;)

I always had the old one at 10 anyway, but I can understand why one might want to have it shorter than that.

Okay, we'll see what the future brings. Thanks for the heads up Gigapixels. (Y)

The top rounded corners on the recent news bar don't have transparent background so you get little bits of white.

Also a way to hide the {recent posts/news/leaderboard/whatever you want to call it} or at least set it to 5 for the default, 10 is way too long.

Edit: i just noticed the button.

The top rounded corners on the recent news bar don't have transparent background so you get little bits of white.

Also a way to hide the {recent posts/news/leaderboard/whatever you want to call it} or at least set it to 5 for the default, 10 is way too long.

You can hide it by clicking 'Hide Activity' at the top :)

EDIT: Noticed your edit, peachey ;)

I agree with your point about the rounded corners. I reckon that will be fixed by the time the theme is out of beta stage.

Edited by cJr.

I must say... I hadn't been on Neowin for a while, then came back a few weeks ago, and it has become, by far, one of the best looking websites on all of the internet. You guys have really out done yourselves. I remember when Neowin first launched. It's amazing how much it's changed. Keep up the great work guys.

Well when you click "hide activity" I think the button should change to "enable activity" or something like that...At first it confused me having to click "hide activity" to make it pop up again. :p

Hmmm. It seems to say "Show Activity" to me, after I've clicked "Hide Activity"... have they fixed it that quick? :p

Well, I'm of the opinion that if you can make something more usable with a couple of simple tweaks, you should go ahead and do it. I don't see why you'd be against making the theme easier to use.

So you need more besides the date of the thread and the icon? ;)

I just noticed this thread and changed, I like it a lot :)

Personally, I like it how there's more recent topics up at the top.

I'm interested to see how it will run when all the bugs have been ironed out, although I haven't encountered any problems yet.

Would it be possible to maybe half the Latest Forum Activity box to 5 lines based on the detected screen resolution?

It really takes up massive amounts of vertical space on the short and stubby 1024x600 eeePC screen.

Shift wasn't perfect about this either, since I'd half to click "show more" or "show less" each time I switched between my eee and my desktop.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Qwen 3.6 is better value per dollar, and you can run it locally for free.
    • I don't believe them that anyone using threads, at least meaningfully. It's the same thing for Facebook, people just don't engage with Meta platforms like they are thinking. This isn't 2006.
    • Not taking AI slop on the go with me, hard pass for me.
    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!