Neowin Community Minecraft Server


Message added by Brandon H,

Server Address: mc.neowin.net

Currently Running Vanilla 1.19.3

Recommended Posts

12 hours ago, puma1 said:

Hey Guys, wasn't the old server that started with the IP 206 or 207 still running as of last week? I lost track of the other posting and now couldn't find it and came across this. 

Can I get whitelisted?

Thanks!

hey, the OP on page 1 has the accurate IP. mc.neowin.net has been updated for the new IP as well.

 

We're currently running the modpack that's listed on the OP as well in case you're trying to connect with a vanilla client. Currently we're on version 3.3.0 of the FTB Revelation pack but I will be updating it to the newly released 3.4.0 version this weekend. :)

 

edit: I transferred over the old whitelist to the new server so if you were whitelisted before you should still be able to log in otherwise I can whitelist you tonight when I get home if you provide your Minecraft username :)

@Brandon H Can you please change the config so we can have 5 homes like it was before.  Also can we remove the limit on the number of times the /back command can be used. Apparently the default is once per death which is silly. Thx.

 

Unfortunately I can't find a good guide on how to set the permissions.

31 minutes ago, Slugsie said:

@Brandon H Can you please change the config so we can have 5 homes like it was before.  Also can we remove the limit on the number of times the /back command can be used. Apparently the default is once per death which is silly. Thx.

 

Unfortunately I can't find a good guide on how to set the permissions.

didn't even realize the modpack had multiplayer commands like /home and /back implemented. I'll have to take a look to determine what controls that as 1.12.2 doesn't do datapacks and it's not a plugin server.

Hey guys, how did you learn how to do all he things possible in this redemption pack? Seems to be so many new items, and technologies. Anyone have any suggestions on where to start? I saw Slugsie's auto miner, looked really cool.. I think I will need to get the basics done first and then start trying to get all of the "ingredients" needed to create something like that. Maybe on a smaller scale at first. Also so I understand, when you die, your gear does not fall to the ground and wait for you right? it's just gone? 

When you die your gear is put into a grave. You can then come back later, break the grave and retrieve your items. Unfortunately you died by falling into my quarry, and the quarry then cleared out the grave and hoovered up the items. I still have them - seemed to be a few wooden tools, and some other items ended up in my collection chests.

 

I think the best place to start is by looking into Tinkers Construct. It has loads of things for making more efficient use of ores (i.e. doubling them up), and you can make custom tools with their own abilities - like lumber axes that chop down trees in one go.

you should have a book in your inventory (or possibly slugsie has it now and can get it back to you) that walks you through the main mods. you can switch between the books by looking up so you're not targeting any blocks and hold left click while crouching.

 

you can also look up the mod wikis. most of them are organized rather well. I do a combination of both.

 

as slugsie mention tinkers tools is a good place to start as it helps stock up your resources better once you get a smeltery going.

I'm to the point now where I need to start getting better storage options than just normal chests so I'll probably start delving into Thaumcraft or the ME Computers.

Just now, puma1 said:

Hey guys, does this always come up when loading the game? Take a bit to open each time. 

image.thumb.png.5131d7dfc84e1fe377e9bc56049cc783.png

yeah that's the loading from the Mincraft client; sometimes it hides it and shows the loading bars from the FTB launcher but not always.

 

there are over 200 mods in this modpack so that's why the initial loading takes awhile.

3 minutes ago, puma1 said:

Thanks Brandon!  So will this world be up for some time or is there a reset coming up?

as long as everyone is satisfied and has no issues running it then we'll be sticking with it for some time :)

 

we were all just getting a bit bored of Vanilla

1 hour ago, Slugsie said:

I think I broke the server. Exploring a fair way out, when suddenly the terrain stopped loading, then a few seconds later I was kicked and can't get back on. :(

server seems to still be running but players are getting kicked with an io exception. I'm restarting it now, hopefully that helps

5 hours ago, Nuculi said:

Is pack being updated, its out now! 3.4.0 i think it is now!

yeah, I was planning to update it this weekend like I mentioned before but got busy this weekend and didn't have much time to myself.

 

I'll probably update it after work tomorrow before I hop on the server myself :) 

I'm guessing you installed Revelation 3.4.0. Server is currently on 3.3.0, although @Brandon H is planning on updating tonight if he has time. Either hang tight, or downgrade for a day or two.

On 03/12/2020 at 22:00, Brandon H said:

didn't even realize the modpack had multiplayer commands like /home and /back implemented. I'll have to take a look to determine what controls that as 1.12.2 doesn't do datapacks and it's not a plugin server.

Here is some info on how to configure it

https://forum.feed-the-beast.com/threads/home-commands-permissions-with-ranks.264574/

 

Also, can we have Creeper damage turned off like it was on the last server please?

On 12/12/2020 at 12:08, Slugsie said:

Here is some info on how to configure it

https://forum.feed-the-beast.com/threads/home-commands-permissions-with-ranks.264574/

 

Also, can we have Creeper damage turned off like it was on the last server please?

found the wiki page too and it doesn't list all the permissions for some reason; it had the max homes permission listed in the example though so I was able to adjust that part. I'll have to play around to see if I can find what the labels are for the other permissions.

 

also turned off mob griefing in the server rules.

20 hours ago, Brandon H said:

found the wiki page too and it doesn't list all the permissions for some reason; it had the max homes permission listed in the example though so I was able to adjust that part. I'll have to play around to see if I can find what the labels are for the other permissions.

 

also turned off mob griefing in the server rules.

Seems to be working, I've set two homes. :) Only thing is there is a 5 minute cool down between uses of /Home, any chance that can be removed, it's very annoying?

 

Just now, Slugsie said:

Seems to be working, I've set two homes. :) Only thing is there is a 5 minute cool down between uses of /Home, any chance that can be removed, it's very annoying?

 

probably. the FTB permissions implementation aren't very will documented so I'm still doing some digging.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • I think it depends on what you're looking for to do, and the time you have to spare. With my Dwarf 3, I easily spend 3-4 hour sessions; half an hour driving to an un-light polluted place, another half hour unpacking and setting up the smart scope + tripod for equatorial tracking, then 15 more minutes mucking around with settings and shooting calibration frames, spending a few hours shooting, merging with past photo sessions, etc. It's crazy how time flies and I often get home later than I expected. It's something I still need to set aside a good part of an evening to do, all in all. For one session, where you often need like four for best results when it comes to deep space objects. Even with a smart scope like Dwarf 3, regular non-astro photography is still way more approachable to people getting into photography. I find this is a time consuming niche no matter how I go about it. With practice, I can probably begin cutting time here but I think where smart scopes find their home is among people who love to shoot the night sky but don't have the spare time to go deep with the "navigator level" attunement to the night sky itself in addition to everything else. Having said this, _if_ you have even more time to spend on this hobby, it will probably be even more rewarding to do it more by hand and learn the skies and the details of how it all works.
    • I misread the title and thought Teams itself would be redesigned. Imagine having this one as a native WinUI app.
    • Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame by Sayan Sen Last month Neowin reported on a major issue on Dell systems wherein a bug in its official support tool was leading to endless blue screen of death (BSOD) and restarts. Following our report, Dell officially acknowledged its SupportAssist-related crash issue, confirming that the culprit is not Microsoft's operating system but rather a faulty version of its own remediation software. In a newly published support advisory, Dell stated that version 5.5.16.0 of Dell SupportAssist Remediation and Alienware SupportAssist Remediation can trigger blue screen errors and unexpected system restarts. The company notes that the problematic component operates independently of the main SupportAssist application, meaning users should not remove the primary SupportAssist software when troubleshooting the issue. According to Dell, the crashes are linked specifically to the SupportAssist Remediation service, which is bundled with SupportAssist OS Recovery Tools, and as such it has since released an updated version, 5.5.16.1, which is said to resolve the problem. Affected users are advised to first verify whether version 5.5.16.0 is installed by checking the Installed Apps section in Windows Settings. If so, Dell recommends updating SupportAssist OS Recovery Tools through either SupportAssist's "Update Software" feature or Dell Command Update. Dell also advises users to back up important data before performing the update and to ensure systems remain connected to power throughout the installation process. If you are still having issues though make sure to report to the Dell support forum. As it turns out though Dell is not the only PC maker currently dealing with update-related headaches as HP is also facing a separate but probably equally frustrating issue involving recent Windows Secure Boot updates that were released with recent Windows 11 Patch Tuesdays. Similar to Dell, HP also put up its own support article where it explains the issue. The company says that affected devices could hit a brick wall when booting as they run into a BitLocker recovery loop after the April 2026 updates. The problem appears to affect systems wherein the new UEFI Secure Boot CA 2023 certificates fail to apply properly. As such affected users will find themselves entering their recovery key over and over again despite the system otherwise functioning normally. HP says such PCs should be updated to the latest available BIOS version and configured with the necessary Secure Boot certificates before installing Microsoft's Windows 11 Patch Tuesday updates. Systems that are already experiencing the problem may require BIOS configuration changes to restore normal boot behavior. Admins can find information regarding that in the support article here on HP's official website.
    • Getting further away from the artistic study of mental disease that was the first game... (which never needed any sequels to begin with) But I get it, a company has to make money. And the second was at least visually impressive, if not in any other way.
    • If its the devs fault you would think Unreal would help M$ take full advantage of Unreal and work with them to fix the performance issues. Otherwise they are catching unwarranted bad press.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      69
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!